How To Clean The Wulf Mods Merge Peak and Proxy Glass Kit

Heads up y’all, if you want the absolute best performance, pure flavor, and ferocious clouds from your Wulf Mods Merge Peak and Proxy Glass Kit, then you’re going to have to keep it clean. Don’t worry, with just a few Wulf Pack pointers, you’ll be able to keep your Puffco Accessory squeaky clean with ease.

Follow along with Wulf as we share our expertise to give you a definitive rundown on keeping your Wulf Merge operating at 110% at all times. Because the Merge channels vapor from two separate high-output concentrate vaporizers simultaneously through a unified borosilicate airpath, staying on top of reclaim buildup is essential for wide open airflow and unadulterated flavor.

If you have any questions on initial setup or temperature calibration, check out our how to use the Wulf Merge Peak and Proxy guide. This walkthrough focuses exclusively on how to clean and maintain your glass kit to ensure a full lifespan of double-barrel dabbing enjoyment.

Table of Contents:

Wulf Merge Cleaning Quick Start Guide
1. Power Off Both Puffco Vaporizers
2. Disassemble The Wulf Merge Kit & Devices
3. Soak The Borosilicate Glass Cup, Mouthpiece & Terp Pearls
4. Clean The Silicone Adapter & Device Airpaths
5. Rinse Thoroughly & Leave Everything To Dry Completely
6. Reassemble & Enjoy Fresh Double-Barrel Hits!
Enjoy A Clean Wulf Merge Setup

Wulf Merge Cleaning Quick Start Guide

Before we dive into the finer details of cleaning your Wulf Merge, we wanted to provide y’all with a quick rundown of the essential steps. This way, if you’re in a rush or want fast answers, you can get back to vaping as soon as possible:

By following these 6 simple steps, you’ll have your Wulf Mods Merge Peak and Proxy Glass Kit spotless and ready to deliver massive hits for years to come.

1. Power Off Both Puffco Vaporizers

First things first: whenever you clean the Wulf Merge or the vaporizers powering it, you must always turn off both your Puffco Peak (or Peak Pro) and your Puffco Proxy. Cleaning active devices can lead to accidental button presses, misfires, or liquid entering warm atomizer connections.

Hold down the power button on your Peak device until the LED indicator illuminates down and powers off. Repeat the process on your Puffco Proxy to ensure neither device is in standby mode. Tapping the buttons should yield zero illumination or haptic vibration, confirming both units are safely locked down for service.

Powering off your hardware prior to disassembly isn’t just a recommendation, it is an absolute requirement to protect yourself, your Puffco batteries, and your glass.

2. Disassemble The Wulf Merge Kit & Devices

Next, you’ll need to systematically take apart the entire Wulf Merge assembly to isolate the glass and silicone from the battery units.

1. Gently twist and pull off the top borosilicate glass mouthpiece.
2. Peel away the custom silicone adapter seated over the Proxy chamber.
3. Carefully slide the Puffco Proxy out of the Wulf Merge glass cup.
4. Remove the Merge glass cup from the base of your Puffco Peak or Peak Pro just as you would remove factory glass.
5. Remove the included 4mm quartz terp pearls from the atomizer chambers.

Always place your electronic Puffco bases in an upright, secure location far away from your cleaning station. Keep your 4mm terp pearls in a small silicone dish or ramekin so they don’t roll off your counter or slip down the sink drain.

3. Soak The Borosilicate Glass Cup, Mouthpiece & Terp Pearls

The borosilicate glass body and mouthpiece bear the brunt of vapor accumulation from both devices. Over repeated double-barrel sessions, golden reclaim condenses along the internal vents and neck chimney.

Place the Wulf Merge glass cup, the glass mouthpiece, and the two 4mm quartz terp pearls into a sealable glass container or heavy-duty zip-top bag. Submerge the glass completely in 91%+ or 99% isopropyl alcohol (ISO). Avoid lower concentrations like 70% rubbing alcohol, as the higher water content slows down the dissolution of dense concentrates.

Let the components soak for at least 60 minutes. For heavy buildup, gently agitate the bag to flush solvent through the internal vented air pathway. The alcohol will dissolve baked on oils on contact, restoring the borosilicate glass to crystal clear condition with zero need for abrasive scrubbing tools.

4. Clean The Silicone Adapter & Device Airpaths

While the glass components are soaking, turn your attention to the silicone adapter, the Puffco atomizers, and the base airpath ports.

Silicone Adapter Care:
Do not leave silicone submerged in isopropyl alcohol for extended periods, as prolonged exposure can weaken silicone elasticity. Instead, wipe the silicone adapter clean with an alcohol-dampened cloth or swab, then rinse immediately with warm water and mild dish soap.

Device Airpaths & Chambers:

• Dampen a cotton swab or precision dab swab with 99% ISO (press out excess liquid so it is not dripping).
• Swab the ceramic chambers of both your Peak and Proxy to clear out remaining oil and prevent chamber chazzing.
• Carefully detail the air intake and exhaust holes on both Puffco bases to remove sticky oil that could restrict the draw.
• Wipe the gold electrical contact pins beneath the atomizers to ensure seamless power delivery.

Ensuring that the entirety of your Wulf Merge is clean, even the smaller pieces and air pathways, is just as important to your session quality as cleaning the main chamber. That’s why we recommend giving everything a once over to check for any concentrate leftovers and then cleaning them. 

5. Rinse Thoroughly & Leave Everything To Dry Completely

Once the glass components and terp pearls have soaked completely clean, carefully remove them from the alcohol bath. Pour out the spent alcohol safely and rinse the glass cup, mouthpiece, and terp pearls under lukewarm running water to flush away any residual solvent.

Warning, the isopropyl alcohol post-soak will be pretty rank, so make sure to pour it down the drain carefully without staining your clothes or surroundings. 

Now comes the stage of “hurry up and wait.” Lay all glass, silicone, and quartz pieces out on a clean microfiber towel in a well-ventilated area away from direct sunlight.

Allow everything to air-dry completely for 60 minutes. Using your Merge when moisture or alcohol residue remains in the airpath can lead to unpleasant fumes or short circuits as the liquids are pulled deeper into your Puffco devices. That’s why you need to always make sure the internal glass channels are bone dry before reassembly.

6. Reassemble & Enjoy Fresh Double-Barrel Hits!

With all components sparkling clean and completely dry, it’s time to put your hybrid rig back together:

1. Seat the Wulf Merge glass cup securely into the base of your Puffco Peak or Peak Pro, verifying that the lower air intake aligns with the base port.
2. Slide your Puffco Proxy smoothly into the Merge cup.
3. Fit the silicone adapter snugly over the Proxy chamber rim.
4. Attach the glass mouthpiece on top.
5. Drop a clean 4mm quartz terp pearl into each chamber if desired.
6. Take a quick dry pull to ensure airflow is completely uninhibited.

Power both units back on, load your extracts, set your favorite temperatures, and enjoy pure, silky smooth double-barrel clouds exactly as intended!

Enjoy A Clean Wulf Merge Setup

At the end of the day, maintaining your Wulf Merge Peak and Proxy Glass Kit isn’t complicated. Routine cleaning keeps your airflow wide open, preserves the delicate terpene profiles of your extracts, and ensures your Puffco devices perform at peak efficiency.

Keep your airpath spotless and your Wulf Merge will continue delivering mind-blowing hybrid dabs every time you fire up your setup.

Have any more questions for the Wulf Pack? Make sure to check out the Wulf Resource Center for more helpful tips, device walkthroughs, and operational guides. Thanks for choosing Wulf for your sessions, and welcome to the Wulf Pack! Stay howling out there y’all, and we’ll see you in the next session! Arooo!!!