Resource Center
How To Use The Wulf Mods Merge Peak and Proxy Glass Kit
Continue With This Resource
Wulf Mods Quick Brief
What You Should Know
A fast summary of the key points, questions, and guidance covered in this guide.
Overview
Key Takeaways
- Which Puffco vaporizers are required to operate the Wulf Merge Glass Kit?
- Why should you perform a test draw before loading concentrates into the chambers?
- How do you synchronize the heat cycles between the Peak and Proxy for a simultaneous hit?
- Can you run independent temperature settings across both chambers?
- What is the proper method for cleaning the Wulf Merge glass and silicone components?
Questions This Resource Answers
- The Wulf Mods Merge Peak and Proxy Glass Kit transforms two separate Puffco smart vaporizers into a synchronized, dual-barrel concentrate station using precision 1:1 borosilicate glass housing.
- Taking a dry test draw after assembly confirms that internal airflow holes between the base, glass cup, and Proxy chamber are aligned before loading extracts.
- Starting the Peak's heating cycle a few seconds prior to activating the Proxy offsets differing thermal ramp-up times so both chambers reach vaporization temperature together.
- Independent electronic temperature controls allow connoisseurs to simultaneously vaporize complementary concentrate strains at different heat profiles through a single draw tip.
- Soaking disassembled borosilicate glass elements in 99% isopropyl alcohol dissolves stubborn reclaim while keeping electronic device bases completely protected from liquid moisture.
Recommended Products
Shop Puffco Accessories
Browse the products featured in this guide.
Owners Guide
Owner Playbook
The full playbook below expands on the practical steps and tips behind this guide.
Arooo!!! Ready to get howling with your Wulf Mods Merge Peak and Proxy Glass Kit for the ultimate dabbing experience?
You’ve come to the right place, because Wulf is here to breakdown how to use your Wulf Mods Merge Peak and Proxy Glass Kit with this in depth setup and vaping guide. This way you can get started with your Wulf Merge as soon as possible, with the best results to match.
As a part of our Puffco Accessory collection, the Merge has been designed from the ground up to work exclusively with the Puffco Peak Series and Puffco Proxy Concentrate Vaporizers. This means you can enjoy 1:1 compatibility that matches the excellence Puffco is known for.
Keep reading to learn how to attach your Wulf Merge Peak and Proxy Glass Kit correctly and xprepare yourself for the most mind blowing of dabs, only with the ferocious power of Wulf Puffco Accessories!
Table of Contents:
Which Puffco Vaporizers Work with the Wulf Merge?
Wulf Merge Peak & Proxy Quick Reference Guide
1. Charge Your Puffco Vaporizers
2. Attach The Wulf Merge To Your Peak and Proxy
3. Load Your Puffco Peak and Proxy Chambers With Concentrate
4. Power On and Choose Heat Settings On The Peak and Proxy
5. Using The Wulf Merge With Your Peak and Proxy
6. Swab Your Peak and Proxy Chambers
7. Cleaning The Wulf Merge Peak and Proxy Glass Kit
Unleash The Wulf Merge
Wulf Merge Peak & Proxy Quick Reference Guide
In a rush to start double dabbing? Here is a fast breakdown covering the essential steps to assemble, operate, and maintain your Wulf Mods Merge Peak and Proxy Glass Kit:
| # | STEP | ACTION / HOW TO | WULF PACK PRO TIP |
|---|---|---|---|
| 1 | Charge Devices | Fully charge your Puffco Peak/Peak Pro and Puffco Proxy via their dedicated chargers. | Never charge unattended overnight; both devices reach full capacity in under an hour. |
| 2 | Assemble Merge | Seat the Merge cup into the Peak, insert the Proxy, and attach the silicone adapter and glass mouthpiece. | Align all air intake holes properly; always take a quick test draw before loading concentrates. |
| 3 | Load Chambers | Scoop a grain-of-rice sized amount of concentrate into both ceramic bowls. | Ensure both chamber carb caps/seals sit completely flush to prevent vapor leaks. |
| 4 | Set Temperature | Dial in your preferred heat levels (Peak: 1x click presets; Peak Pro & Proxy: Bluetooth app). | Mix and match temp profiles between chambers to optimize terpenes and heavy cloud density. |
| 5 | Fire & Inhale | Double-click (2x) the Peak first, then double-click the Proxy; wait for haptic vibration and inhale. | Starting the Peak first ensures both devices reach operating temp at the same time. |
| 6 | Swab Bowls | Let bowls cool slightly, then swab both ceramic dishes clean with a cotton swab. | Swabbing immediately prevents permanent chazzing and keeps flavor pristine for the next round. |
| 7 | Deep Clean Glass | Disassemble the glass cup, mouthpiece, and terp pearls, then soak in 99% isopropyl alcohol. | Rinse thoroughly with warm water and let dry 100% before reassembly. |
Which Puffco Vaporizers Work with the Wulf Merge?
The Wulf Merge is only compatible with the following official Puffco releases. Only ever use your Wulf Merge with the following devices to ensure proper functionality.
Wulf Merge Compatibility:
- Puffco Peak Pro Concentrate Vaporizer with 3DXL Atomizer
- Puffco New Peak Smart E-Rig
- Puffco New Proxy Portable Concentrate Vaporizer
The main function of the Wulf Merge is to connect your Puffco Proxy onto the top of your Puffco Peak (or Peak Pro), replacing the original glass in order to allow for dual compatibility for epic cloud power.
The Wulf Merge will not function without both a Puffco Peak Series and a Puffco Proxy, thus you need to have the pair in order for the glass attachment to actually work correctly.
1. Charge Your Puffco Vaporizers
First things first, if you want to get started with your Wulf Merge then you’ll need to make sure that both your chosen Puffco Peak series and Puffco Proxy are fully charged. This way you have topped off battery power and don’t get jammed up mid session.
Charging & Prepping Tips:
- Only use the charging cable or base that came with your Puffco vaporizer
- Always stay present while charging
- Quickly unplug your e-rig once at full battery
- Never charge overnight
- Charge in safe locations away from heat, moisture, or other extremes
Make sure to follow these general safety precautions and you’ll be ready to go. Both of these Puffco devices can charge in less than an hour, so keep that in mind when you’re preparing for a session with your Wulf Merge.
2. Attach The Wulf Merge To Your Peak and Proxy
With your Puffco batteries all charged up, now you can move onto the actual assembly of your Wulf Mods Merge Peak and Proxy Glass Kit.
To ensure you can do so properly, below we’re going to walk you step-by-step through the steps on attaching your Wulf Merge and getting your Puffco Accessory up and running.
How to Connect the Wulf Merge to the Puffco Peak and Proxy?
- Remove the glass top from your Puffco Peak or Peak Pro
- Remove the glass bottom and top from your Puffco Proxy
- Carefully slide your Wulf Merge cup into the top of your Puffco Peak or Peak Pro
- Double check all air holes are proper aligned on the Peak
- Slide your Puffco Proxy into the Wulf Merge cup
- Double check all air holes are proper aligned on the Proxy
- Attach the top silicone adapter to your Proxy
- Attach the glass mouthpiece to your Proxy
- Take a final test draw to check airflow
- Time to dab!
Thanks to its custom form fit, attaching the Wulf Merge to your Puffco Peak and Proxy is a straightforward process. This means if something doesn’t seem to be fitting, you’re not doing things correctly.
Because the Puffco Peak and Proxy require their airflow holes to be unobstructed to work correctly, double checking that they work correctly with your Wulf Merge is an essential component of setup.
That’s why we recommend always checking on your Merge with a test draw before the first dab, this way you don’t end up wasting wax in the process. So if anything does feel off, make sure to twist your Puffco device around until the air begins to flow.
3. Load Your Puffco Peak and Proxy Chambers With Concentrate
Now that your Wulf Merge is assembled, it’s time to load in all of the concentrate materials that you’ll be enjoying. As a result of the doubled up nature of the Merge, this means you’ll need to properly load both your Peak and Proxy to get things fired up right.
- Use your dab tool to scoop up a small amount of concentrate (size of a grain of rice)
- Carefully place it onto the bottom of your chamber
- Close your chamber to lock everything in
Make sure to double check that the seals on your Puffco Peak and Proxy chambers are completely flush, as you don’t want any vapor leaking out mid rip and costing you precious clouds in the process.
Other than that, make sure to follow all of the normal preparation you would when using either of the Puffco devices solo and you’ll be ready to go.
4. Power On and Choose Heat Settings On The Peak and Proxy
Each of the three compatible choices for your Wulf Merge (Peak, Peak Pro, Proxy) all have their own unique operating systems and temperature ranges.
Thanks to the completely separate operating systems, you can fine tune each of your chambers exactly how you prefer. This lets you mix together low and high temperatures, or go whole hog with the spiciest of mind blowing clouds, the choice is yours.
Peak Heat Adjustment:
- The Puffco Peak comes with 4 pre-set fixed heat settings (Low, Medium, High, Max)
- Press the power button one time (1x) to cycle through heat settings
- Once you’re desired setting is reached, stop pressing the power button
- Your heat level is now locked in
Peak Pro Heat Adjustment
- The Puffco Peak Pro comes with Bluetooth compatibility allowing for real time temperature control (400°F to 644°F)
- Use your phone to control the temperature and customize your session
- Your temperature level is now locked in
Proxy Heat Adjustment:
- The Puffco Proxy comes with Bluetooth compatibility allowing for real time temperature control (400°F to 644°F)
- Use your phone to control the temperature and customize your session
- Your temperature level is now locked in
Once you’ve adjusted each of your chambers to your liking, you’re all ready to move onto the fireworks show and actually start double dabbing.
5. Using The Wulf Merge With Your Peak and Proxy
To start your sessions with the Wulf Merge you must press the power button on both your Puffco Peak (Peak Pro) and Puffco Proxy two times (2x) to begin each of their respective heating countdowns.
As the Puffco Proxy has a slightly shorter heating duration, if you want both vaporizers to reach temperature around the same time we recommend starting your Peak / Peak Pro first, then hitting start on your Proxy.
This will help things line up a little better and give you the true simultaneous hit experiences. We would also like to note that you don’t really need them to be simultaneous, as even if things are a bit offset all it means is even longer dab time for you and your friends. A true Wulf win-win.
How To Use The Wulf Merge Peak and Proxy Glass Kit?
- Press the power button 2x on your Peak / Peak Pro
- Press the power button 2x on your Proxy
- Wait until each vibrates
- Inhale from the Wulf Merge mouthpiece to experience both
- Clean chambers post-dab
- Reload and vape again!
Overall using the Wulf Merge is no more difficult than a normal Puffco experience, meaning you can expect easy seamless access without any complex speed bumps slowing you down in the process.
With the only real difference being having to start up two separate devices, this makes for a straightforward, hard hitting experience that maintains Puffco’s classic portability, all while upping the power higher than ever before.
6. Swab Your Peak and Proxy Chambers
After completing your dab cycle on both the Peak and Proxy, you’ll now need to swab both of their ceramic chambers to keep them clean and ready to go for your next him.
We recommend waiting a few seconds for your chambers to cool, then using a q-tip or dab swab in order to wipe out any of the leftover concentrates. This helps prevent chazzing and will keep your Wulf Merge hitting on all cylinders going forward.
Never skip this step, as coming back to a dirty, sticky chamber with caked on leftovers is never fun and a pain to clean. Instead doing it right away is the quickest and most effective method of keeping your Puffco chambers clean.
7. Cleaning The Wulf Merge Peak and Proxy Glass Kit
To get the most from your Wulf Merge Peak and Proxy Glass Kit you’ll need to make sure to keep it clean. Luckily with the right supplies, doing so is incredibly straightforward and highly effective when you know what to do.
How To Clean The Wulf Merge Peak and Proxy Glass Kit:
- Power off your Puffco Peak and Proxy
- Remove the Puffco Proxy from the Merg
- Remove the Merge Cup and Mouthpiece
- Place the Merge Cup, Mouthpiece, Terp Pearls in a sealable container / bag
- Soak all Merge elements in isopropyl alcohol (longer the better)
- Dump out isopropyl alcohol post-soak (will be gross, be careful)
- Wash off your Wulf Merge
- Leave everything to air dry
Keeping your Wulf Merge clean is the #1 method of extending your enjoyment, ensuring you can savor all the flavors, potency, and mind blowing potential of your Puffco Accessory without pause.
Make sure to check out the Wulf Cleaning category to see our range of purpose built cleaners designed specifically to deal with hard to remove concentrate stains and more.
Unleash The Wulf Merge
Now that you’ve got the tools to fully unleash your own Wulf Merge Peak and Proxy Glass Kit, the power is in your hands to experience the most versatile, ferocious Puffco clouds of your entire life!
With twice the power, twice the flavor, and unlimited possibilities – the Wulf Merge is here to help all of our Wulf Pack members experience more from their favorite Puffco Vaporizers and remix your sessions like never before.
Have any more questions for the Wulf Pack? Take a look through the Wulf Resource Center for more in-depth guides just like this. Thanks for running with the Pack and stay howling out there y’all! Arooo!!!
Frequently Asked Questions
Owners Guide FAQs
Common questions related to this guide and how to apply the information when choosing your device.
Can I Use The Wulf Merge If I Only Own A Puffco Peak Or Only A Puffco Proxy?
Why Do I Need To Start Heating The Peak A Few Seconds Before The Proxy?
What Should I Do If I Feel Heavy Draw Resistance During My Pre-Dab Test Pull?
Can I Vaporize Two Different Concentrates At Different Temperatures Simultaneously?
How Do I Clean The Wulf Merge Without Damaging My Puffco Hardware?
Wulf Mods Trust Center
About This Resource
Understand how this guide was researched, reviewed, and maintained by the Wulf Mods editorial team.
Editorial Standards
- Written for the people choosing and using these devices.
- Reviewed for clarity, accuracy, and practical retail value.
- Based on current manufacturer specifications and product documentation when available.
- Updated as products, regulations, category trends, or market conditions evolve.
- Built on deep, hands-on product experience.
- Designed to help you choose the right device with confidence.
Research Methodology
This owner guide was prepared to help you set up, use, and care for your device with confidence. Guidance is based on hands-on product experience, common questions, and real-world use.
- Hands-on product experience
- Setup and first-use guidance
- Cleaning, care, and maintenance
- Common questions and troubleshooting
- Safe and responsible use
- Real-world use considerations
- Editorial review for clarity and usefulness
Supporting Sources
Sources used to support this resource are included for transparency and documentation.
Article Information
Intended Audience
- Everyday customers
- First-time buyers
- Experienced enthusiasts
- Dry herb users
- Concentrate users
- Anyone upgrading their setup
Editorial Policy
Wulf Mods educational resources are reviewed periodically to maintain accuracy and relevance. When product specifications, regulations, category trends, or market conditions change, articles may be updated with a new review date. Trusted product guidance.
Keep Exploring
Related Resources
Keep learning with related Wulf Mods resources selected to help you get more out of your device.
