Deep Cut Mod
Bring new spatter to your sessions! The Wulf Mods X-Ray Series Uni Pro 510 Thread Battery by Wulf and Yocan provides an adjustable voltage (2.0V to 4.2V), a 10-second preheat feature, and an OLED display. This latest Wulf device has a clear body with its signature spatter design. You can adjust the height and cartridge width from 6mm to 14mm. Powered by a 650mAh battery and comes with a Type-C charging cable. The XRAY is available in five spatter colors: Amethyst, Aqua, Azure, Crimson, and Granite.
How to Start
To activate the X-RAY device, press the power button five times simultaneously. After that, use the left temperature control button to decrease the voltage in 0.1V steps and the right temperature button to increase it. Once you’ve set your desired voltage, press the power button twice to initiate the preheat cycle. To stop preheat, simply press the button twice again.
How to Load Your Cartridge
To put oils in the cartridge, take off the mouthpiece and fill the cart with your desired amount. Next, attach the magnetic adapter to the cartridge and twist on the mouthpiece. Then, place your cartridge back into the chamber. To remind you that you have attached your cartridge successfully, the lights will stay on for a second.
How to Adjust the XRAY
This device is compatible with cartridges that are 42mm or larger. To adjust to a certain height, just use the lever to raise or lower it to your preferred level.
This device is suitable for cartridges ranging from 6mm to 14mm in diameter. To modify its width, the valve can be swiveled within a certain range to match your oil cartridge size.
How to Charge
At its very first charge, keep the device plugged in for two hours for its first time. After its initial charge, limit the time to an hour or less. Charging the battery for more than an hour may damage it or shorten its lifespan. To power off your device, simply press the power button five times.
What’s Included:
- (1) Wulf XRAY Vaporizer Device
- (1) Type-C Cable
- (1) Magnetic 510 Ring
