Hit The Deck!
We’ve all heard of kick flips, but what about cart-flips? Well the future is now because the Wulf Mods Deck Voltage Battery is ready to drop in! The Deck pulls double time as a finger skateboard, complete with highlights like functioning grip tape, and as a fiery 510 threaded cartridge battery. This lets you hit tricks and your cartridge with the same device, making for the world’s first skateboard-vaporizer!!! Take a couple of rips before messing around with your Deck for some mini skate tricks and see if you can land the newly dubbed “Blinker-Kick-Flip” or use your creativity to make up your own cloud-centric combos!
As for the tech in this Deck, you get to enjoy a 500mAh battery, a variety of 5 different temperatures (2.4, 2.8, 3.2, 3.6, 4.0v), and an extended 12s preheat mode. This gives you and your friends all the vaporizing power needed to enjoy the full spectrum experience contained within your cartridges. To ensure your Deck matches your personal vibes, we released 9 unique color choices ranging from black-red spatter to a swirling full color. Hop on board with the Deck Voltage Battery today and get ready to shred some gnarly clouds with Wulf Mods!
Loading A Cartridge Into The Deck
Have a Deck in hand and looking to start ripping clouds? First choose a 510 threaded cartridge from your collection of any size and then carefully twist it into the threaded connection on the top of your device. Once the cartridge is snugly twisted into your Deck, you are all ready to go!
Using The Deck
When you're ready, kick things off and start riding some clouds, press the power button on your Deck 5x in a row. This will turn on your battery and cause the screen to light up, letting you know it’s all ready to start ripping. Hold down the power button and inhale from the cartridge mouthpiece to start enjoying your clouds, simply releasing it whenever you’ve had enough. To wind things down for the time being, press your power button an additional 5x to switch it off.
Adjusting The Temperature On Your Deck
Experiment with the 5 different temperature settings (2.4, 2.8, 3.2, 3.6, 4.0v) to find your favorite combination of fire and flavor by pressing the power button 3x in a row. This will change your temperature to the next in line and display your new current setting on the screen. Continue to press the power button 3x in a row to cycle through all of the options. When you’ve reached your desired temperature, simply stop pressing the power button and enjoy the new setting.
Preheating The Deck
For an extra gnarly cloud that hits twice as hard, press the power button on your Deck 2x in a row to activate its 12s preheat function. This begins a countdown where your Deck slowly warms your cartridge, getting it primed for an extra powerful hit. When your screen stops flashing, you can then use your Deck like normal and enjoy the preheated cloud.
How to Charge Your Deck
Keep your sessions howling by making use of the Deck’s USB-C charging port to ensure you're always at full battery. Once plugged in to charge, the screen on your Deck will begin to flash to let you know it’s connected. After it’s reached full capacity, your screen will stop flashing after 10s and power down to let you know it’s time to disconnect.
Troubleshooting Your Deck
Head up! Your Deck is programmed with a host of different troubleshooting warnings in order to give you visual notices that something is up. Take a look below to get an understanding of what the Deck is trying to tell you and enjoy the smoothest possible sessions.
-
Low Battery: When your battery is low and you attempt to use your Deck, the screen will read “0%” and flash 3 times to indicate it needs a charge.
-
Open-Circuit: If there is an issue with your cartridge connection, the Wulf logo on your Deck will flash red 2x to let you know it needs to be fixed.
-
Short-Circuit: When the Wulf logo flashes red 5x immediately cease using your device. This is the short circuit warning and you should not use the Deck again until this warning subsides.
-
Time Out: To prevent over-heating, if you hold down the power button longer than 15 seconds at a time, the Logo and Screen will flash 3x and your device will stop applying heat to the cartridge. Continue your session by releasing the power button and pressing it again.
How to Clean The Deck
Keep your sessions rolling smoothly by performing basic maintenance on your Deck. To do so, first turn off your device and fully disconnect the attached cartridge. Once disassembled, take a q-tip or swab dampened with isopropyl to completely wipe down the threaded connections, mouthpiece, and body of both components. Pay careful attention to the wheels on the Deck, using the swab to ensure any grime or dirt is removed. After you’ve fully wiped down the device and cartridge, leave both parts to dry completely before attempting to use them again.
What’s Included:
WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge. Failure to follow these instructions could result in battery damage and frying of the internal system.
WARNING: This product can expose you to chemicals including nicotine, which is known to the State of California to cause cancer. For more information, go to 
